Prolong EP-2 Grease w/AFMT provides high load carrying ability, delivers outstanding performance in a wide range of high to low temperature applications with excellent resistance to water wash out and oxidation. This next generation grease is characterized by superior mechanical stability coupled with extremely high load carrying ability. Prolong EP-2 Grease outperforms Lithium complex, Calcium complex, Aluminum complex and Polyurea greases. Especially effective for roller and motor bearings, conveyors, cables and chains.
Prolong Super Protectant is water-resistant so it won’t wash off like regular protectants. It blocks out the elements for a more durable shine and longer lasting protection. Tested against the best protectants in the world, this product outlasts them all! With this unique formula you can dial the shine up or down, depending on how much you wipe.Prolong Super Protectant is water-resistant so it won’t wash off like regular protectants. It blocks out the elements for a more durable shine and longer lasting protection.
- Provides superior extreme pressure lubrication
- Helps prevent rust, corrosion and oxidation
- Lubricates over a wide and extreme temperature range
- Takes less grease for much better, longer lasting lubrication
- Exceeds NLGI GC/LB (ASTM D 4950)
- Contains AFMT (Anti Friction Metal Treatment)
How to Use
This product is designed for use in any standard cartridge loading grease gun. For proper loading, see grease gun instructions.
Steel mill had a pillow block bearing running at 326 degrees. Normal operating temperature was 190 degrees. The fourteen-year old bearing was smoking, but they had to keep production going until the morning when maintenance could fix it with new parts. They used EP-2 Grease and twenty minutes later, the temperature had dropped to 260 degrees, the smoking and squealing had stopped. Through the night, the temperature had dropped to 130 degrees and leveled out at 167.
Steel Mill in Ohio
Gold mine’s initial problem was that a set of bearings had score marks causing the operating temperature to rise and no replacement bearings were available for approximately 2 weeks. They turned the white metal bearing caps around, i.e. top to bottom, cleaned the old grease and contamination out, filled with Prolong EP-2 Grease and ran for 4 weeks until a scheduled repair could be done with new bearings. They only run on EP-2 now, but use far less for longer than the old type of grease with better bearing life.
Gold Mining Group, South Africa
When two samples of grease were tested by the South African Bureau of Standards, Prolong Super Lubricants met or exceeded all of their test criteria.
Properties tested by SABS were as follows:
Penetration, copper corrosion, drop point, evaporation loss, oil separation, rust prevention, water wash-out, wheel bearing leakage, working stability, Timken OK-value, and wear scar diameter.
South African Bureau of Standards, South Africa
Research scientists at Northwestern University, sponsored by the Infrastructure Technology Institute, conducted a laboratory project “to study the effect of various lubricants on the wear and corrosion of metals recommended for bridge pin and eyebar connections”. Scientists ran corrosion tests in a salt fog chamber to replicate the environmental conditions United States bridges are exposed to. They used several types of metals and 7 competitive greases in their testing.
Findings are as follows:
- “Prolong EP-2 gave an exceptional reduction in corrosion rate”
- “Results show Prolong EP-2 Grease to be about 10 times more resistant to corrosion than a typical wheel bearing grease”
They ran a series of mixed grease tests on wear and corrosion resistance and concluded, “None of the mixed greases performed as well as Prolong EP-2 Grease, however, there was some reduction in corrosion as the percent of Prolong EP-2 increased”.
R. H. Krueger, Research Scientist
We use Prolong EP-2 Grease in air and electric motor bearings, molding press tie bars, oven roller wheels, mask washer agitators, guide pins, mold parts, and volume air pumps plantwide, all with excellent results’ unequivocally recommend Prolong products in any of the above applications.”
F.D. Helman, Maintenance Supervisor
Worthington Industries, Inc, Salem, Ohio
Manufacturers of injection molded plastics
Cement company operates a Fuller Kavako to unload cement from the hold of cargo ships. The Fuller’s bearing must be greased every 6 hours and the procedure takes 45 minutes. However, since we began using EP-2 Grease the between greasing has increased to every 2 days. Using your product had led us to substantial savings. We have also begun using EP-2 Grease on the basket elevator. We originally greased the bearings every other day. Since using your product, it is now only necessary to grease the bearings twice a week.”
Daniel Douglas- North Texas Cement Company, Houston, TX
Other Industrial Products